Slotted and Allen Pocket Dzus Fasteners Tool
Always have the correct tool for your Dzus at hand with this dual head Dzus pocket tool makes it easy to pop out dzus quarter turn fastener whether it’s an allen head or slotted.
Throw this in your glovebox or tool bag and be prepared to easily pop those tins off when necessary.
Dzus quarter-turn fasteners are used in the drag racing industry for quickly connecting bodies and panels that need to be removed for access to components and are the industry leader for lightweight connections.
How do you measure Dzus?
Taking measurements of Dzus
It is correct to measure a Dzus Fastener’s length or grip from the base of the spring locking area to where the head meets the body. For flush heads and self-ejecting Dzus fasteners, the measurement is made from the top of the head to the bottom of the spring locking area.
Dzus Diameter Measurement
Our inventory of Dzus include a variety of diameters. The shaft of a Dzus determines the diameter of the fastener. For an undercut style fastener, the diameter is determined by measuring the widest section of the shaft. The diameter of 7/16′′ Dzus is actually .406′′, not 7/16′′ (.437). BTW The diameter of the fasteners is displayed in fractions of an inch since they are made in the USA. Dzus are most commonly sold in diameters of 5/16″ and 7/16″.
Measurement of Dzus Springs
Springs from Dzus come in three sizes: 3/4″, 1″, and 1-3/8″. The size is determined by the distance between the rivet centers of the spring. As a rule, 3/4″ Dzus Springs are used with 1/4″ diameter Dzus, 1″ Dzus Springs with 5/16″ Dzus, and 1-3/8″ Dzus Springs with 7/16″ Dzus.